Improving Workplace Safety: An Ergonomic Assessment and Engineering Control Approach

Siti Mariam Abdul Rahman; Ahsana Aqilah Ahmad; Muhammad Danieal Abdullah

doi:10.24191/jaeds.v5i2.135

Authors

Siti Mariam Abdul Rahman Faculty of Mechanical Engineering, Universiti Teknologi MARA, Shah Alam, Selangor, Malaysia.
Ahsana Aqilah Ahmad Faculty of Mechanical Engineering, Universiti Teknologi MARA, Shah Alam, Selangor, Malaysia.
Muhammad Danieal Abdullah Faculty of Mechanical Engineering, Universiti Teknologi MARA, Shah Alam, Selangor, Malaysia.

DOI:

https://doi.org/10.24191/jaeds.v5i2.135

Keywords:

HIRARC, PDCA Cycle, Workplace Injuries, Ergonomic Assessment, REBA

Abstract

Workplace injuries in machining departments, particularly back pain from manual handling, reduce productivity and increase manpower shortages. This study aimed to identify the root causes of these injuries and propose an engineering control solution through the Plan-Do-Check-Act (PDCA) cycle. Hazard Identification, Risk Assessment, and Risk Control (HIRARC), Ishikawa diagram analysis, and ergonomic assessment using the Rapid Entire Body Assessment (REBA) were applied to evaluate existing practices. The findings showed that lifting cutting tools from low storage racks produced a high REBA score of 9, indicating a high risk of musculoskeletal disorders. A new ergonomically designed storage rack concept was developed and evaluated using CATIA V5 software, with three alternatives compared through a Pugh Chart. Design B, which eliminated the need for trunk bending, was selected. Reassessment revealed that the REBA score decreased from 9 to 2, while the risk score for back pain was reduced from 12 to 3, achieving a 75% risk reduction. These improvements demonstrate a significant enhancement in workplace safety, reducing injury risks and improving productivity. The study highlights how ergonomic interventions integrated with the PDCA framework can provide practical solutions for minimising occupational hazards and ensuring sustainable productivity.

Downloads

Download data is not yet available.

References

Venkata Subbiah, Krishanna Moorthy, and Rahim Basha, “Measuring the Effectiveness of Health and Safety Practices at Work Place,” International Journal of Research and Analytical Reviews, vol. 5, no. 4, pp. 852–857, 2018.

Lay Zhan Yek and Mohd Nasrull Abdol Rahman, “A Case Study of An Ergonomic Risk Assessment for Working Posture among Maintenance Workers,” Research Progress in Mechanical and Manufacturing Engineering, vol. 4, no. 1, pp. 105–114, 2023.

O. B. Demir and F. T. Yilmaz, “The Effect of Posture Regulation Training on Musculoskeletal Disorders, Fatigue Level and Job Performance in Intensive Care Nurses,” BMC Nurs, vol. 23, no. 1, p. 778, Oct. 2024, doi: 10.1186/s12912-024-02387-w.

F. Yang et al., “The Prevalence and Risk Factors of Work Related Musculoskeletal Disorders among Electronics Manufacturing Workers: A Cross-Sectional Analytical Study in China,” BMC Public Health, vol. 23, no. 1, p. 10, Jan. 2023, doi: 10.1186/s12889-022-14952-6.

Noorul Huda Zakaria, Norudin Mansor, and Zalinawati Abdullah, “Workplace Accident in Malaysia: Most Common Causes and Solutions,” Business and Management Review, vol. 2, no. 5, pp. 75–88, 2012.

Dr. J. A. Jogie, Dr. D. Rampersad, Dr. D. Bharrath-Singh, Dr. S. Joseph, Dr. A. Clarke, and Dr. T. La Rosa, “A Comprehensive Review of the Hierarchy of Controls and Barriers to its Implementation,” International Journal of Preventive Medicine and Health, vol. 5, no. 3, pp. 32–38, Mar. 2025, doi: 10.54105/ijpmh.C1061.05030325.

Thamer Saeed Balubaid and Abdulrahman Basahel, “Assessing the Occupational Safety and Health Management System based on Plan-Do-Check-Act Approach – A Case Study of the Saudi Cargo Sector,” International Journal of Engineering Research & Technology, vol. 12, no. 3, pp. 378–383, 2023.

A. M. Kholif, D. S. Abou El Hassan, M. A. Khorshid, E. A. Elsherpieny, and O. A. Olafadehan, “Implementation of Model for Improvement (PDCA‐cycle) in Dairy Laboratories,” J Food Saf, vol. 38, no. 3, Jun. 2018, doi: 10.1111/jfs.12451.

A. Daud et al., “Assessing Ergonomic Risks: REBA Analysis of Food Delivery Riders in Eastern Peninsular Malaysia,” Int J Occup Med Environ Health, vol. 38, no. 2, pp. 170–178, Apr. 2025, doi: 10.13075/ijomeh.1896.02558.

Y. A. A, A. K. A, and I. S. O, “Ergonomic Analysis of Worker Postures in Waste Collection Job,” International Journal of Management and Sustainability, vol. 6, no. 3, pp. 47–53, 2017, doi: 10.18488/journal.11.2017.63.47.53.

N. Khamarollah et al., “Ergonomic Risk Assessment and Symptoms of Musculoskeletal Disorders among Garment Manufacturing Workers in Kota Bharu, Kelantan,” Industrial Engineering & Management Systems, vol. 23, no. 1, pp. 63–70, Mar. 2024, doi: 10.7232/iems.2024.23.1.063.

P. Ross, “Ergonomic Hazards in the Workplace,” AAOHN Journal, vol. 42, no. 4, pp. 171–176, Apr. 1994, doi: 10.1177/216507999404200405.

J.A. Doshi, J.D. Kamdar, S.Y. Jani, and S.J. Chaudhary, “Root Cause Analysis Using Ishikawa Diagram For Reducing Radiator Rejection,” International Journal of Engineering Research and Application, vol. 2, no. 6, pp. 684–689, 2012.

N. A. Ansari and M. J. Sheikh, “Evaluation of work Posture by RULA and REBA: A Case Study,” IOSR Journal of Mechanical and Civil Engineering, vol. 11, no. 4, pp. 18–23, 2014.

N. C. Deziel et al., “Applying the Hierarchy of Controls to Oil and Gas Development,” Environmental Research Letters, vol. 17, no. 7, p. 071003, Jul. 2022, doi: 10.1088/1748-9326/ac7967.

A. A. Rahim, S. N. Musa, S. Ramesh, and M. K. Lim, “A Systematic Review on Material Selection Methods,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 234, no. 7, pp. 1032–1059, Jul. 2020, doi: 10.1177/1464420720916765.

Baba Md Deros, Nor Kamaliana Khamis, Ahmad Rasdan Ismail, Haris Jamaluddin, Azmi Mat Adam, and Sarudin Rosli, “An Ergonomics Study on Assembly Line Workstation Design,” Am J Appl Sci, vol. 8, no. 11, pp. 1195–1201, 2011.

N. J. Izyati, I. S. A., N. A. A., R. A. H., D. A. I., and A. R. D., “Risk Management and Safety Education in Custom Garage,” Journal of Safety Education, vol. 1, no. 1, pp. 13–18, Jun. 2023, doi: 10.15294/jse.v1i1.70315.

E. Garosi, F. Sheikh, and M. Goodarzi, “Ergonomic Interventions in Risk Reduction,” 2025. doi: 10.5772/intechopen.1008463.

G. Pramuhadi, S. Herodian, and F. Anhar, “Kajian Analisis Risiko Keselamatan Kerja di Workshop Traktor,” Jurnal Agricultural Biosystem Engineering, vol. 4, no. 2, pp. 190–210, Jun. 2025, doi: 10.23960/jabe.v4i2.11104.

Les. Irwig, Judy. Irwig, Lyndal. Trevena, Melissa. Sweet, and Ron. Tandberg, “Relative Risk, Relative and Absolute Risk Reduction, Number Needed to Treat and Confidence Intervals,” in Smart Health Choices: Making Sense of Health Advice, Hammersmith Books Limited, 2013, ch. 18, p. 358.

A. Barratt, “Tips for Learners of Evidence-based Medicine: 1. Relative Risk Reduction, Absolute Risk Reduction and Number Needed to Treat,” Can Med Assoc J, vol. 171, no. 4, pp. 353–358, Aug. 2004, doi: 10.1503/cmaj.1021197.

P. Wilkinson and C. MacKenzie, “Effective Engineering Controls ... and the Humans They Depend on,” ACS Chemical Health & Safety, vol. 30, no. 1, pp. 1–2, Jan. 2023, doi: 10.1021/acs.chas.2c00086.