Formability Analysis of Dissimilar Aluminium Tailor Welded Blanks by Low-Powered Fibre Laser for Lightweight Automotive Application
Keywords:
Formability, Tailor Welded Blanks, Aluminium alloys, Low-power, Laser WeldingAbstract
The automotive industry is increasingly adopting lightweight materials to improve fuel efficiency and reduce emissions, with aluminium alloys emerging as a promising option for vehicle weight reduction. This study investigates the formability challenges of dissimilar AA5052-H32 and AA6061-T6 aluminium tailor welded blanks (TWBs) fabricated using low-powered fibre laser welding for potential lightweight automotive applications. Welding parameters included laser powers of 270 W, 290 W and 310 W, paired with welding speeds of 10 mm/s, 15 mm/s and 20 mm/s, to join the dissimilar alloy pair in a butt-weld configuration via successive double-sided welding. Limiting dome height (LDH) tests revealed that the TWBs achieved only 35-40% of base metal formability, with fracture strains below 0.1 for both major and minor deformations. The presence of porosity in the weld zone, including a softening region identified by microhardness testing, contributed to premature failure during formability testing. These findings highlight the challenges associated with forming operations involving low-power laser welded aluminium TWBs and necessitate further research to improve formability and address manufacturing constraints.
Downloads
References
G. Refiadi, I.S. Aisyah, and J.P. Siregar, “Trends in Lightweight Automotive Materials for Improving Fuel Efficiency and Reducing Carbon Emissions,” Automotive Experiences, vol. 2 no. 3, pp.78–90, 2019, doi: 10.31603/ae.v2i3.2984.
S. Kleinbaum, C. Jiang, and S. Logan, “Enabling sustainable transportation through joining of dissimilar lightweight materials,” Mrs Bulletin, vol. 44, no. 8, pp. 608–612, 2019, doi: 10.1557/MRS.2019.178
Y. Gao et al., “Research progress, application and development of high performance 6000 series aluminum alloys for new energy vehicles,” Journal of Materials Research and Technology, vol. 32, pp. 1868–1900, 2024, doi: 10.1016/j.jmrt.2024.08.018.
The Aluminum Association, “Ford’s All-Aluminum-Body F-150 Pickup Truck”, 2021. [Online]. Available: https://www.aluminum.org [Accessed on 21 January 2025]
G.A. Kunkel, and Y. Hovanski, “From the lab to your driveway: Aluminum tailor-welded blanks.” Welding Journal, vol. 95 no. 8, pp. 36–39, 2016.
Y. Hovanski, J. Carsley, B. Carlson, S. Hartfield-Wunsch et al., “Comparing Laser Welding Technologies with Friction Stir Welding for Production of Aluminum Tailor-Welded Blanks.” SAE International Journal of Materials and Manufacturing, vol. 7 no. 3, pp. 537–544, 2014, doi: 10.4271/2014-01-0791.
F. Vollertsen and C. Thomy, “Welding with fiber lasers from 200 to 17000 W.” International Congress on Applications of Lasers & Electro-Optics, pp 254-264, 2005, doi: 10.2351/1.5060499.
S. Katayama, “Introduction: Fundamentals of laser welding,” In Handbook of Laser Welding Technologies, Woodhead Publishing, Cambridge, UK, 2013, pp. 3–16.
S.B. Chikalthankar, G.D. Belurkar, and V.M. Nandedkar, “Factors Affecting on Springback in Sheet Metal Bending: A Review.” International Journal of Engineering and Advanced Technology, vol. 3 no. 4, pp. 247-251, 2014
A.A. Zadpoor, J. Sinke, and R. Benedictus, “Springback behavior of friction stir welded tailor-made blanks,” Proceedings of the International Deep-drawing Research Group Conference 2007, pp 317-324, 2007.
T.B. Stoughton,”A general forming limit criterion for sheet metal forming”. International Journal of Mechanical Sciences, vol. 42 no. 1, pp. 1–27, 2000, doi: https://doi.org/10.1016/S0020-7403(98)00113-1.
M. Miles, “Formability Testing of Sheet Metals,” in Metalworking: Sheet Forming, ASM International, Ohio, United States, 2006, pp. 673–696.
J. Sinke, C. Iacono , and A.A. Zadpoor, “Tailor made blanks for the aerospace industry,” International Journal of Material Forming, vol. 3, pp. 849–852, 2010.
E. Ahmed, U. Reisgen, M. Schleser, and O. Mokrov, “On formability of tailor laser welded blanks of DP/TRIP steel sheets,” Science and Technology of Welding and Joining, vol. 15 no.5, pp. 337–342, 2010, doi: 10.1179/136217110X12731414739754.
L. Huang, X. Hua, D. Wu, and L. Fang, “Experimental Investigation and Numerical Study on the Elimination of Porosity in Aluminum Alloy Laser Welding and Laser–GMA Welding.” Journal of Materials Engineering and Performance,” vol. 28 no. 3, pp.1618–1627, 2019.
J. Wang, X. Chen, L. Yang, and G. Zhang, “A strength estimation method for aluminum alloy butt welded joints with mismatched mechanical properties,” Thin-walled Structures, vol. 179, p. 109585, 2022, doi: 10.1016/j.tws.2022.109585
J.M. Sánchez-Amaya, Z. Boukha, M.R. Amaya-Vázquez, L. González-Rovira, and F.J. Botana, “Analysis of the Laser Weldability under Conduction Regime of 2024, 5083, 6082 and 7075 Aluminium Alloys,” Materials Science Forum, 713, pp. 7–12, 2012, doi: 10.4028/www.scientific.net/MSF.713.7.
P. Sensharma, M. Collette, and J. Harrington, “Effect of welded properties on aluminum structures.” Ship Structure Committee, 2010.
M. Jiang, X. Chen, Y. Chen, and W. Tao, “Mitigation of porosity defects in fiber laser welding under low vacuum,” Journal of Materials Processing Technology, vol. 276, 116385, 2020, doi: 10.1016/j.jmatprotec.2019.116385.
H. Zhao, and T. DebRoy, “Macroporosity free aluminum alloy weldments through numerical simulation of keyhole mode laser welding,” Journal of Applied Physics, vol. 93 no. 12, pp. 10089–10096, 2003.
S. Katayama, M. Mizutani, and A. Matsunawa, “Development of porosity prevention procedures during laser welding,” Proc. SPIE 4831, First International Symposium on High-Power Laser Macroprocessing, 3 March 2003, doi: 10.1117/12.497801.
M. Miyagi, H. Wang, R. Yoshida, Y. Kawahito, H. Kawakami, and T. Shoubu, “Effect of alloy element on weld pool dynamics in laser welding of aluminum alloys,”Scientific Reports, vol. 8, 12944, 2018, doi: 10.1038/s41598-018-31350-4.
R. Garcia, V. López, C. Natividad, R. Ambriz, and M. Salazar, “Fusion Welding with Indirect Electric Arc” in Arc Welding, InTechOpen, Rijeka, Croatia, 2011, pp 21- 44, doi: 10.5772/27113.
S. S. Nayak, E. Biro, and Y. Zhou, “Laser welding of advanced high-strength steels (AHSS),” in Welding and Joining of Advanced High Strength Steels (AHSS), Woodhead Publishing, Cambridge, UK, 2015, pp. 71–92.
J. M Sánchez-Amaya, T. Delgado, J. J De Damborenea, V. Lopez, and F. J. Botana, “Laser welding of AA 5083 samples by high power diode laser,” Science and Technology of Welding and Joining, vol. 14 no. 1, pp. 78–86, 2009.
Y. Zhang, F. Lu, H. Cui, Y. Cai, , S. Guo, and X. Tang, “Investigation on the effects of parameters on hot cracking and tensile shear strength of overlap joint in laser welding dissimilar Al alloys,” The International Journal of Advanced Manufacturing Technology, vol. 86, pp. 2895–2904, 2016.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Mohd Fadzil Jamaludin, Ahmad Baharuddin Abdullah, Zahurin Samad, Farazila Yusof
This work is licensed under a Creative Commons Attribution 4.0 International License.
